X-Git-Url: https://pd.if.org/git/?a=blobdiff_plain;f=sqlite%2Fsqlite3.h;h=fe82824324882d97e6549915a7d74e0428c7c0a8;hb=refs%2Ftags%2Fv0.3.7;hp=5f28e036b30e9c5f2b01bc412ff11d76ff4c572a;hpb=1797d41ad1ffcbc522e570bd38c28173fe79ace1;p=zpackage
diff --git a/sqlite/sqlite3.h b/sqlite/sqlite3.h
index 5f28e03..fe82824 100644
--- a/sqlite/sqlite3.h
+++ b/sqlite/sqlite3.h
@@ -123,9 +123,9 @@ extern "C" {
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
-#define SQLITE_VERSION "3.21.0"
-#define SQLITE_VERSION_NUMBER 3021000
-#define SQLITE_SOURCE_ID "2017-10-24 18:55:49 1a584e499906b5c87ec7d43d4abce641fdf017c42125b083109bc77c4de48827"
+#define SQLITE_VERSION "3.25.1"
+#define SQLITE_VERSION_NUMBER 3025001
+#define SQLITE_SOURCE_ID "2018-09-18 20:20:44 2ac9003de44da7dafa3fbb1915ac5725a9275c86bf2f3b7aa19321bf1460b386"
/*
** CAPI3REF: Run-Time Library Version Numbers
@@ -470,6 +470,9 @@ SQLITE_API int sqlite3_exec(
** the most recent error can be obtained using
** [sqlite3_extended_errcode()].
*/
+#define SQLITE_ERROR_MISSING_COLLSEQ (SQLITE_ERROR | (1<<8))
+#define SQLITE_ERROR_RETRY (SQLITE_ERROR | (2<<8))
+#define SQLITE_ERROR_SNAPSHOT (SQLITE_ERROR | (3<<8))
#define SQLITE_IOERR_READ (SQLITE_IOERR | (1<<8))
#define SQLITE_IOERR_SHORT_READ (SQLITE_IOERR | (2<<8))
#define SQLITE_IOERR_WRITE (SQLITE_IOERR | (3<<8))
@@ -502,17 +505,22 @@ SQLITE_API int sqlite3_exec(
#define SQLITE_IOERR_COMMIT_ATOMIC (SQLITE_IOERR | (30<<8))
#define SQLITE_IOERR_ROLLBACK_ATOMIC (SQLITE_IOERR | (31<<8))
#define SQLITE_LOCKED_SHAREDCACHE (SQLITE_LOCKED | (1<<8))
+#define SQLITE_LOCKED_VTAB (SQLITE_LOCKED | (2<<8))
#define SQLITE_BUSY_RECOVERY (SQLITE_BUSY | (1<<8))
#define SQLITE_BUSY_SNAPSHOT (SQLITE_BUSY | (2<<8))
#define SQLITE_CANTOPEN_NOTEMPDIR (SQLITE_CANTOPEN | (1<<8))
#define SQLITE_CANTOPEN_ISDIR (SQLITE_CANTOPEN | (2<<8))
#define SQLITE_CANTOPEN_FULLPATH (SQLITE_CANTOPEN | (3<<8))
#define SQLITE_CANTOPEN_CONVPATH (SQLITE_CANTOPEN | (4<<8))
+#define SQLITE_CANTOPEN_DIRTYWAL (SQLITE_CANTOPEN | (5<<8)) /* Not Used */
#define SQLITE_CORRUPT_VTAB (SQLITE_CORRUPT | (1<<8))
+#define SQLITE_CORRUPT_SEQUENCE (SQLITE_CORRUPT | (2<<8))
#define SQLITE_READONLY_RECOVERY (SQLITE_READONLY | (1<<8))
#define SQLITE_READONLY_CANTLOCK (SQLITE_READONLY | (2<<8))
#define SQLITE_READONLY_ROLLBACK (SQLITE_READONLY | (3<<8))
#define SQLITE_READONLY_DBMOVED (SQLITE_READONLY | (4<<8))
+#define SQLITE_READONLY_CANTINIT (SQLITE_READONLY | (5<<8))
+#define SQLITE_READONLY_DIRECTORY (SQLITE_READONLY | (6<<8))
#define SQLITE_ABORT_ROLLBACK (SQLITE_ABORT | (2<<8))
#define SQLITE_CONSTRAINT_CHECK (SQLITE_CONSTRAINT | (1<<8))
#define SQLITE_CONSTRAINT_COMMITHOOK (SQLITE_CONSTRAINT | (2<<8))
@@ -880,7 +888,8 @@ struct sqlite3_io_methods {
**
^sqlite3_prepare_v3() differs from sqlite3_prepare_v2() only in having
** the extra prepFlags parameter, which is a bit array consisting of zero or
** more of the [SQLITE_PREPARE_PERSISTENT|SQLITE_PREPARE_*] flags. ^The
** sqlite3_prepare_v2() interface works exactly the same as
** sqlite3_prepare_v3() with a zero prepFlags parameter.
-**
*/
SQLITE_API int sqlite3_prepare(
sqlite3 *db, /* Database handle */
@@ -4508,11 +4573,25 @@ SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt);
** from [sqlite3_column_blob()], [sqlite3_column_text()], etc. into
** [sqlite3_free()].
**
-** ^(If a memory allocation error occurs during the evaluation of any
-** of these routines, a default value is returned. The default value
-** is either the integer 0, the floating point number 0.0, or a NULL
-** pointer. Subsequent calls to [sqlite3_errcode()] will return
-** [SQLITE_NOMEM].)^
+** As long as the input parameters are correct, these routines will only
+** fail if an out-of-memory error occurs during a format conversion.
+** Only the following subset of interfaces are subject to out-of-memory
+** errors:
+**
+**
sqlite3_value_nochange
+** | → | True if the column is unchanged in an UPDATE
+** against a virtual table.
**
**
** Details:
@@ -4827,6 +4933,19 @@ SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int6
** then the conversion is performed. Otherwise no conversion occurs.
** The [SQLITE_INTEGER | datatype] after conversion is returned.)^
**
+** ^Within the [xUpdate] method of a [virtual table], the
+** sqlite3_value_nochange(X) interface returns true if and only if
+** the column corresponding to X is unchanged by the UPDATE operation
+** that the xUpdate method call was invoked to implement and if
+** and the prior [xColumn] method call that was invoked to extracted
+** the value for that column returned without setting a result (probably
+** because it queried [sqlite3_vtab_nochange()] and found that the column
+** was unchanging). ^Within an [xUpdate] method, any value for which
+** sqlite3_value_nochange(X) is true will in all other respects appear
+** to be a NULL value. If sqlite3_value_nochange(X) is invoked anywhere other
+** than within an [xUpdate] method call for an UPDATE statement, then
+** the return value is arbitrary and meaningless.
+**
** Please pay particular attention to the fact that the pointer returned
** from [sqlite3_value_blob()], [sqlite3_value_text()], or
** [sqlite3_value_text16()] can be invalidated by a subsequent call to
@@ -4835,6 +4954,28 @@ SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int6
**
** These routines must be called from the same thread as
** the SQL function that supplied the [sqlite3_value*] parameters.
+**
+** As long as the input parameter is correct, these routines can only
+** fail if an out-of-memory error occurs during a format conversion.
+** Only the following subset of interfaces are subject to out-of-memory
+** errors:
+**
+**
+** - sqlite3_value_blob()
+**
- sqlite3_value_text()
+**
- sqlite3_value_text16()
+**
- sqlite3_value_text16le()
+**
- sqlite3_value_text16be()
+**
- sqlite3_value_bytes()
+**
- sqlite3_value_bytes16()
+**
+**
+** If an out-of-memory error occurs, then the return value from these
+** routines is the same as if the column had contained an SQL NULL value.
+** Valid SQL NULL returns can be distinguished from out-of-memory errors
+** by invoking the [sqlite3_errcode()] immediately after the suspect
+** return value is obtained and before any
+** other SQLite interface is called on the same [database connection].
*/
SQLITE_API const void *sqlite3_value_blob(sqlite3_value*);
SQLITE_API double sqlite3_value_double(sqlite3_value*);
@@ -4849,6 +4990,7 @@ SQLITE_API int sqlite3_value_bytes(sqlite3_value*);
SQLITE_API int sqlite3_value_bytes16(sqlite3_value*);
SQLITE_API int sqlite3_value_type(sqlite3_value*);
SQLITE_API int sqlite3_value_numeric_type(sqlite3_value*);
+SQLITE_API int sqlite3_value_nochange(sqlite3_value*);
/*
** CAPI3REF: Finding The Subtype Of SQL Values
@@ -5504,6 +5646,41 @@ SQLITE_API SQLITE_EXTERN char *sqlite3_temp_directory;
*/
SQLITE_API SQLITE_EXTERN char *sqlite3_data_directory;
+/*
+** CAPI3REF: Win32 Specific Interface
+**
+** These interfaces are available only on Windows. The
+** [sqlite3_win32_set_directory] interface is used to set the value associated
+** with the [sqlite3_temp_directory] or [sqlite3_data_directory] variable, to
+** zValue, depending on the value of the type parameter. The zValue parameter
+** should be NULL to cause the previous value to be freed via [sqlite3_free];
+** a non-NULL value will be copied into memory obtained from [sqlite3_malloc]
+** prior to being used. The [sqlite3_win32_set_directory] interface returns
+** [SQLITE_OK] to indicate success, [SQLITE_ERROR] if the type is unsupported,
+** or [SQLITE_NOMEM] if memory could not be allocated. The value of the
+** [sqlite3_data_directory] variable is intended to act as a replacement for
+** the current directory on the sub-platforms of Win32 where that concept is
+** not present, e.g. WinRT and UWP. The [sqlite3_win32_set_directory8] and
+** [sqlite3_win32_set_directory16] interfaces behave exactly the same as the
+** sqlite3_win32_set_directory interface except the string parameter must be
+** UTF-8 or UTF-16, respectively.
+*/
+SQLITE_API int sqlite3_win32_set_directory(
+ unsigned long type, /* Identifier for directory being set or reset */
+ void *zValue /* New value for directory being set or reset */
+);
+SQLITE_API int sqlite3_win32_set_directory8(unsigned long type, const char *zValue);
+SQLITE_API int sqlite3_win32_set_directory16(unsigned long type, const void *zValue);
+
+/*
+** CAPI3REF: Win32 Directory Types
+**
+** These macros are only available on Windows. They define the allowed values
+** for the type argument to the [sqlite3_win32_set_directory] interface.
+*/
+#define SQLITE_WIN32_DATA_DIRECTORY_TYPE 1
+#define SQLITE_WIN32_TEMP_DIRECTORY_TYPE 2
+
/*
** CAPI3REF: Test For Auto-Commit Mode
** KEYWORDS: {autocommit mode}
@@ -6236,6 +6413,10 @@ struct sqlite3_index_info {
/*
** CAPI3REF: Virtual Table Scan Flags
+**
+** Virtual table implementations are allowed to set the
+** [sqlite3_index_info].idxFlags field to some combination of
+** these bits.
*/
#define SQLITE_INDEX_SCAN_UNIQUE 1 /* Scan visits at most 1 row */
@@ -6261,6 +6442,7 @@ struct sqlite3_index_info {
#define SQLITE_INDEX_CONSTRAINT_ISNOTNULL 70
#define SQLITE_INDEX_CONSTRAINT_ISNULL 71
#define SQLITE_INDEX_CONSTRAINT_IS 72
+#define SQLITE_INDEX_CONSTRAINT_FUNCTION 150
/*
** CAPI3REF: Register A Virtual Table Implementation
@@ -6937,6 +7119,7 @@ SQLITE_API sqlite3_mutex *sqlite3_db_mutex(sqlite3*);
/*
** CAPI3REF: Low-Level Control Of Database Files
** METHOD: sqlite3
+** KEYWORDS: {file control}
**
** ^The [sqlite3_file_control()] interface makes a direct call to the
** xFileControl method for the [sqlite3_io_methods] object associated
@@ -6951,11 +7134,18 @@ SQLITE_API sqlite3_mutex *sqlite3_db_mutex(sqlite3*);
** the xFileControl method. ^The return value of the xFileControl
** method becomes the return value of this routine.
**
-** ^The SQLITE_FCNTL_FILE_POINTER value for the op parameter causes
+** A few opcodes for [sqlite3_file_control()] are handled directly
+** by the SQLite core and never invoke the
+** sqlite3_io_methods.xFileControl method.
+** ^The [SQLITE_FCNTL_FILE_POINTER] value for the op parameter causes
** a pointer to the underlying [sqlite3_file] object to be written into
-** the space pointed to by the 4th parameter. ^The SQLITE_FCNTL_FILE_POINTER
-** case is a short-circuit path which does not actually invoke the
-** underlying sqlite3_io_methods.xFileControl method.
+** the space pointed to by the 4th parameter. The
+** [SQLITE_FCNTL_JOURNAL_POINTER] works similarly except that it returns
+** the [sqlite3_file] object associated with the journal file instead of
+** the main database. The [SQLITE_FCNTL_VFS_POINTER] opcode returns
+** a pointer to the underlying [sqlite3_vfs] object for the file.
+** The [SQLITE_FCNTL_DATA_VERSION] returns the data version counter
+** from the pager.
**
** ^If the second parameter (zDbName) does not match the name of any
** open database file, then SQLITE_ERROR is returned. ^This error
@@ -6965,7 +7155,7 @@ SQLITE_API sqlite3_mutex *sqlite3_db_mutex(sqlite3*);
** an incorrect zDbName and an SQLITE_ERROR return from the underlying
** xFileControl method.
**
-** See also: [SQLITE_FCNTL_LOCKSTATE]
+** See also: [file control opcodes]
*/
SQLITE_API int sqlite3_file_control(sqlite3*, const char *zDbName, int op, void*);
@@ -7011,7 +7201,7 @@ SQLITE_API int sqlite3_test_control(int op, ...);
#define SQLITE_TESTCTRL_ALWAYS 13
#define SQLITE_TESTCTRL_RESERVE 14
#define SQLITE_TESTCTRL_OPTIMIZATIONS 15
-#define SQLITE_TESTCTRL_ISKEYWORD 16
+#define SQLITE_TESTCTRL_ISKEYWORD 16 /* NOT USED */
#define SQLITE_TESTCTRL_SCRATCHMALLOC 17 /* NOT USED */
#define SQLITE_TESTCTRL_LOCALTIME_FAULT 18
#define SQLITE_TESTCTRL_EXPLAIN_STMT 19 /* NOT USED */
@@ -7022,7 +7212,191 @@ SQLITE_API int sqlite3_test_control(int op, ...);
#define SQLITE_TESTCTRL_ISINIT 23
#define SQLITE_TESTCTRL_SORTER_MMAP 24
#define SQLITE_TESTCTRL_IMPOSTER 25
-#define SQLITE_TESTCTRL_LAST 25
+#define SQLITE_TESTCTRL_PARSER_COVERAGE 26
+#define SQLITE_TESTCTRL_LAST 26 /* Largest TESTCTRL */
+
+/*
+** CAPI3REF: SQL Keyword Checking
+**
+** These routines provide access to the set of SQL language keywords
+** recognized by SQLite. Applications can uses these routines to determine
+** whether or not a specific identifier needs to be escaped (for example,
+** by enclosing in double-quotes) so as not to confuse the parser.
+**
+** The sqlite3_keyword_count() interface returns the number of distinct
+** keywords understood by SQLite.
+**
+** The sqlite3_keyword_name(N,Z,L) interface finds the N-th keyword and
+** makes *Z point to that keyword expressed as UTF8 and writes the number
+** of bytes in the keyword into *L. The string that *Z points to is not
+** zero-terminated. The sqlite3_keyword_name(N,Z,L) routine returns
+** SQLITE_OK if N is within bounds and SQLITE_ERROR if not. If either Z
+** or L are NULL or invalid pointers then calls to
+** sqlite3_keyword_name(N,Z,L) result in undefined behavior.
+**
+** The sqlite3_keyword_check(Z,L) interface checks to see whether or not
+** the L-byte UTF8 identifier that Z points to is a keyword, returning non-zero
+** if it is and zero if not.
+**
+** The parser used by SQLite is forgiving. It is often possible to use
+** a keyword as an identifier as long as such use does not result in a
+** parsing ambiguity. For example, the statement
+** "CREATE TABLE BEGIN(REPLACE,PRAGMA,END);" is accepted by SQLite, and
+** creates a new table named "BEGIN" with three columns named
+** "REPLACE", "PRAGMA", and "END". Nevertheless, best practice is to avoid
+** using keywords as identifiers. Common techniques used to avoid keyword
+** name collisions include:
+**
+** - Put all identifier names inside double-quotes. This is the official
+** SQL way to escape identifier names.
+**
- Put identifier names inside [...]. This is not standard SQL,
+** but it is what SQL Server does and so lots of programmers use this
+** technique.
+**
- Begin every identifier with the letter "Z" as no SQL keywords start
+** with "Z".
+**
- Include a digit somewhere in every identifier name.
+**
+**
+** Note that the number of keywords understood by SQLite can depend on
+** compile-time options. For example, "VACUUM" is not a keyword if
+** SQLite is compiled with the [-DSQLITE_OMIT_VACUUM] option. Also,
+** new keywords may be added to future releases of SQLite.
+*/
+SQLITE_API int sqlite3_keyword_count(void);
+SQLITE_API int sqlite3_keyword_name(int,const char**,int*);
+SQLITE_API int sqlite3_keyword_check(const char*,int);
+
+/*
+** CAPI3REF: Dynamic String Object
+** KEYWORDS: {dynamic string}
+**
+** An instance of the sqlite3_str object contains a dynamically-sized
+** string under construction.
+**
+** The lifecycle of an sqlite3_str object is as follows:
+**
+** - ^The sqlite3_str object is created using [sqlite3_str_new()].
+**
- ^Text is appended to the sqlite3_str object using various
+** methods, such as [sqlite3_str_appendf()].
+**
- ^The sqlite3_str object is destroyed and the string it created
+** is returned using the [sqlite3_str_finish()] interface.
+**
+*/
+typedef struct sqlite3_str sqlite3_str;
+
+/*
+** CAPI3REF: Create A New Dynamic String Object
+** CONSTRUCTOR: sqlite3_str
+**
+** ^The [sqlite3_str_new(D)] interface allocates and initializes
+** a new [sqlite3_str] object. To avoid memory leaks, the object returned by
+** [sqlite3_str_new()] must be freed by a subsequent call to
+** [sqlite3_str_finish(X)].
+**
+** ^The [sqlite3_str_new(D)] interface always returns a pointer to a
+** valid [sqlite3_str] object, though in the event of an out-of-memory
+** error the returned object might be a special singleton that will
+** silently reject new text, always return SQLITE_NOMEM from
+** [sqlite3_str_errcode()], always return 0 for
+** [sqlite3_str_length()], and always return NULL from
+** [sqlite3_str_finish(X)]. It is always safe to use the value
+** returned by [sqlite3_str_new(D)] as the sqlite3_str parameter
+** to any of the other [sqlite3_str] methods.
+**
+** The D parameter to [sqlite3_str_new(D)] may be NULL. If the
+** D parameter in [sqlite3_str_new(D)] is not NULL, then the maximum
+** length of the string contained in the [sqlite3_str] object will be
+** the value set for [sqlite3_limit](D,[SQLITE_LIMIT_LENGTH]) instead
+** of [SQLITE_MAX_LENGTH].
+*/
+SQLITE_API sqlite3_str *sqlite3_str_new(sqlite3*);
+
+/*
+** CAPI3REF: Finalize A Dynamic String
+** DESTRUCTOR: sqlite3_str
+**
+** ^The [sqlite3_str_finish(X)] interface destroys the sqlite3_str object X
+** and returns a pointer to a memory buffer obtained from [sqlite3_malloc64()]
+** that contains the constructed string. The calling application should
+** pass the returned value to [sqlite3_free()] to avoid a memory leak.
+** ^The [sqlite3_str_finish(X)] interface may return a NULL pointer if any
+** errors were encountered during construction of the string. ^The
+** [sqlite3_str_finish(X)] interface will also return a NULL pointer if the
+** string in [sqlite3_str] object X is zero bytes long.
+*/
+SQLITE_API char *sqlite3_str_finish(sqlite3_str*);
+
+/*
+** CAPI3REF: Add Content To A Dynamic String
+** METHOD: sqlite3_str
+**
+** These interfaces add content to an sqlite3_str object previously obtained
+** from [sqlite3_str_new()].
+**
+** ^The [sqlite3_str_appendf(X,F,...)] and
+** [sqlite3_str_vappendf(X,F,V)] interfaces uses the [built-in printf]
+** functionality of SQLite to append formatted text onto the end of
+** [sqlite3_str] object X.
+**
+** ^The [sqlite3_str_append(X,S,N)] method appends exactly N bytes from string S
+** onto the end of the [sqlite3_str] object X. N must be non-negative.
+** S must contain at least N non-zero bytes of content. To append a
+** zero-terminated string in its entirety, use the [sqlite3_str_appendall()]
+** method instead.
+**
+** ^The [sqlite3_str_appendall(X,S)] method appends the complete content of
+** zero-terminated string S onto the end of [sqlite3_str] object X.
+**
+** ^The [sqlite3_str_appendchar(X,N,C)] method appends N copies of the
+** single-byte character C onto the end of [sqlite3_str] object X.
+** ^This method can be used, for example, to add whitespace indentation.
+**
+** ^The [sqlite3_str_reset(X)] method resets the string under construction
+** inside [sqlite3_str] object X back to zero bytes in length.
+**
+** These methods do not return a result code. ^If an error occurs, that fact
+** is recorded in the [sqlite3_str] object and can be recovered by a
+** subsequent call to [sqlite3_str_errcode(X)].
+*/
+SQLITE_API void sqlite3_str_appendf(sqlite3_str*, const char *zFormat, ...);
+SQLITE_API void sqlite3_str_vappendf(sqlite3_str*, const char *zFormat, va_list);
+SQLITE_API void sqlite3_str_append(sqlite3_str*, const char *zIn, int N);
+SQLITE_API void sqlite3_str_appendall(sqlite3_str*, const char *zIn);
+SQLITE_API void sqlite3_str_appendchar(sqlite3_str*, int N, char C);
+SQLITE_API void sqlite3_str_reset(sqlite3_str*);
+
+/*
+** CAPI3REF: Status Of A Dynamic String
+** METHOD: sqlite3_str
+**
+** These interfaces return the current status of an [sqlite3_str] object.
+**
+** ^If any prior errors have occurred while constructing the dynamic string
+** in sqlite3_str X, then the [sqlite3_str_errcode(X)] method will return
+** an appropriate error code. ^The [sqlite3_str_errcode(X)] method returns
+** [SQLITE_NOMEM] following any out-of-memory error, or
+** [SQLITE_TOOBIG] if the size of the dynamic string exceeds
+** [SQLITE_MAX_LENGTH], or [SQLITE_OK] if there have been no errors.
+**
+** ^The [sqlite3_str_length(X)] method returns the current length, in bytes,
+** of the dynamic string under construction in [sqlite3_str] object X.
+** ^The length returned by [sqlite3_str_length(X)] does not include the
+** zero-termination byte.
+**
+** ^The [sqlite3_str_value(X)] method returns a pointer to the current
+** content of the dynamic string under construction in X. The value
+** returned by [sqlite3_str_value(X)] is managed by the sqlite3_str object X
+** and might be freed or altered by any subsequent method on the same
+** [sqlite3_str] object. Applications must not used the pointer returned
+** [sqlite3_str_value(X)] after any subsequent method call on the same
+** object. ^Applications may change the content of the string returned
+** by [sqlite3_str_value(X)] as long as they do not write into any bytes
+** outside the range of 0 to [sqlite3_str_length(X)] and do not read or
+** write any byte after any subsequent sqlite3_str method call.
+*/
+SQLITE_API int sqlite3_str_errcode(sqlite3_str*);
+SQLITE_API int sqlite3_str_length(sqlite3_str*);
+SQLITE_API char *sqlite3_str_value(sqlite3_str*);
/*
** CAPI3REF: SQLite Runtime Status
@@ -7257,6 +7631,15 @@ SQLITE_API int sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int r
** highwater mark associated with SQLITE_DBSTATUS_CACHE_WRITE is always 0.
**
**
+** [[SQLITE_DBSTATUS_CACHE_SPILL]] ^(SQLITE_DBSTATUS_CACHE_SPILL
+** This parameter returns the number of dirty cache entries that have
+** been written to disk in the middle of a transaction due to the page
+** cache overflowing. Transactions are more efficient if they are written
+** to disk all at once. When pages spill mid-transaction, that introduces
+** additional overhead. This parameter can be used help identify
+** inefficiencies that can be resolve by increasing the cache size.
+**
+**
** [[SQLITE_DBSTATUS_DEFERRED_FKS]] ^(SQLITE_DBSTATUS_DEFERRED_FKS
** This parameter returns zero for the current value if and only if
** all foreign key constraints (deferred or immediate) have been
@@ -7276,7 +7659,8 @@ SQLITE_API int sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int r
#define SQLITE_DBSTATUS_CACHE_WRITE 9
#define SQLITE_DBSTATUS_DEFERRED_FKS 10
#define SQLITE_DBSTATUS_CACHE_USED_SHARED 11
-#define SQLITE_DBSTATUS_MAX 11 /* Largest defined DBSTATUS */
+#define SQLITE_DBSTATUS_CACHE_SPILL 12
+#define SQLITE_DBSTATUS_MAX 12 /* Largest defined DBSTATUS */
/*
@@ -8276,6 +8660,40 @@ SQLITE_API int sqlite3_vtab_config(sqlite3*, int op, ...);
*/
SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *);
+/*
+** CAPI3REF: Determine If Virtual Table Column Access Is For UPDATE
+**
+** If the sqlite3_vtab_nochange(X) routine is called within the [xColumn]
+** method of a [virtual table], then it returns true if and only if the
+** column is being fetched as part of an UPDATE operation during which the
+** column value will not change. Applications might use this to substitute
+** a return value that is less expensive to compute and that the corresponding
+** [xUpdate] method understands as a "no-change" value.
+**
+** If the [xColumn] method calls sqlite3_vtab_nochange() and finds that
+** the column is not changed by the UPDATE statement, then the xColumn
+** method can optionally return without setting a result, without calling
+** any of the [sqlite3_result_int|sqlite3_result_xxxxx() interfaces].
+** In that case, [sqlite3_value_nochange(X)] will return true for the
+** same column in the [xUpdate] method.
+*/
+SQLITE_API int sqlite3_vtab_nochange(sqlite3_context*);
+
+/*
+** CAPI3REF: Determine The Collation For a Virtual Table Constraint
+**
+** This function may only be called from within a call to the [xBestIndex]
+** method of a [virtual table].
+**
+** The first argument must be the sqlite3_index_info object that is the
+** first parameter to the xBestIndex() method. The second argument must be
+** an index into the aConstraint[] array belonging to the sqlite3_index_info
+** structure passed to xBestIndex. This function returns a pointer to a buffer
+** containing the name of the collation sequence for the corresponding
+** constraint.
+*/
+SQLITE_API SQLITE_EXPERIMENTAL const char *sqlite3_vtab_collation(sqlite3_index_info*,int);
+
/*
** CAPI3REF: Conflict resolution modes
** KEYWORDS: {conflict resolution mode}
@@ -8546,7 +8964,6 @@ SQLITE_API int sqlite3_system_errno(sqlite3*);
/*
** CAPI3REF: Database Snapshot
** KEYWORDS: {snapshot} {sqlite3_snapshot}
-** EXPERIMENTAL
**
** An instance of the snapshot object records the state of a [WAL mode]
** database for some specific point in history.
@@ -8563,11 +8980,6 @@ SQLITE_API int sqlite3_system_errno(sqlite3*);
** version of the database file so that it is possible to later open a new read
** transaction that sees that historical version of the database rather than
** the most recent version.
-**
-** The constructor for this object is [sqlite3_snapshot_get()]. The
-** [sqlite3_snapshot_open()] method causes a fresh read transaction to refer
-** to an historical snapshot (if possible). The destructor for
-** sqlite3_snapshot objects is [sqlite3_snapshot_free()].
*/
typedef struct sqlite3_snapshot {
unsigned char hidden[48];
@@ -8575,7 +8987,7 @@ typedef struct sqlite3_snapshot {
/*
** CAPI3REF: Record A Database Snapshot
-** EXPERIMENTAL
+** CONSTRUCTOR: sqlite3_snapshot
**
** ^The [sqlite3_snapshot_get(D,S,P)] interface attempts to make a
** new [sqlite3_snapshot] object that records the current state of
@@ -8591,7 +9003,7 @@ typedef struct sqlite3_snapshot {
** in this case.
**
**
-** - The database handle must be in [autocommit mode].
+**
- The database handle must not be in [autocommit mode].
**
**
- Schema S of [database connection] D must be a [WAL mode] database.
**
@@ -8614,7 +9026,7 @@ typedef struct sqlite3_snapshot {
** to avoid a memory leak.
**
** The [sqlite3_snapshot_get()] interface is only available when the
-** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
+** [SQLITE_ENABLE_SNAPSHOT] compile-time option is used.
*/
SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_get(
sqlite3 *db,
@@ -8624,24 +9036,35 @@ SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_get(
/*
** CAPI3REF: Start a read transaction on an historical snapshot
-** EXPERIMENTAL
+** METHOD: sqlite3_snapshot
+**
+** ^The [sqlite3_snapshot_open(D,S,P)] interface either starts a new read
+** transaction or upgrades an existing one for schema S of
+** [database connection] D such that the read transaction refers to
+** historical [snapshot] P, rather than the most recent change to the
+** database. ^The [sqlite3_snapshot_open()] interface returns SQLITE_OK
+** on success or an appropriate [error code] if it fails.
+**
+** ^In order to succeed, the database connection must not be in
+** [autocommit mode] when [sqlite3_snapshot_open(D,S,P)] is called. If there
+** is already a read transaction open on schema S, then the database handle
+** must have no active statements (SELECT statements that have been passed
+** to sqlite3_step() but not sqlite3_reset() or sqlite3_finalize()).
+** SQLITE_ERROR is returned if either of these conditions is violated, or
+** if schema S does not exist, or if the snapshot object is invalid.
+**
+** ^A call to sqlite3_snapshot_open() will fail to open if the specified
+** snapshot has been overwritten by a [checkpoint]. In this case
+** SQLITE_ERROR_SNAPSHOT is returned.
+**
+** If there is already a read transaction open when this function is
+** invoked, then the same read transaction remains open (on the same
+** database snapshot) if SQLITE_ERROR, SQLITE_BUSY or SQLITE_ERROR_SNAPSHOT
+** is returned. If another error code - for example SQLITE_PROTOCOL or an
+** SQLITE_IOERR error code - is returned, then the final state of the
+** read transaction is undefined. If SQLITE_OK is returned, then the
+** read transaction is now open on database snapshot P.
**
-** ^The [sqlite3_snapshot_open(D,S,P)] interface starts a
-** read transaction for schema S of
-** [database connection] D such that the read transaction
-** refers to historical [snapshot] P, rather than the most
-** recent change to the database.
-** ^The [sqlite3_snapshot_open()] interface returns SQLITE_OK on success
-** or an appropriate [error code] if it fails.
-**
-** ^In order to succeed, a call to [sqlite3_snapshot_open(D,S,P)] must be
-** the first operation following the [BEGIN] that takes the schema S
-** out of [autocommit mode].
-** ^In other words, schema S must not currently be in
-** a transaction for [sqlite3_snapshot_open(D,S,P)] to work, but the
-** database connection D must be out of [autocommit mode].
-** ^A [snapshot] will fail to open if it has been overwritten by a
-** [checkpoint].
** ^(A call to [sqlite3_snapshot_open(D,S,P)] will fail if the
** database connection D does not know that the database file for
** schema S is in [WAL mode]. A database connection might not know
@@ -8652,7 +9075,7 @@ SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_get(
** database connection in order to make it ready to use snapshots.)
**
** The [sqlite3_snapshot_open()] interface is only available when the
-** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
+** [SQLITE_ENABLE_SNAPSHOT] compile-time option is used.
*/
SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_open(
sqlite3 *db,
@@ -8662,20 +9085,20 @@ SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_open(
/*
** CAPI3REF: Destroy a snapshot
-** EXPERIMENTAL
+** DESTRUCTOR: sqlite3_snapshot
**
** ^The [sqlite3_snapshot_free(P)] interface destroys [sqlite3_snapshot] P.
** The application must eventually free every [sqlite3_snapshot] object
** using this routine to avoid a memory leak.
**
** The [sqlite3_snapshot_free()] interface is only available when the
-** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
+** [SQLITE_ENABLE_SNAPSHOT] compile-time option is used.
*/
SQLITE_API SQLITE_EXPERIMENTAL void sqlite3_snapshot_free(sqlite3_snapshot*);
/*
** CAPI3REF: Compare the ages of two snapshot handles.
-** EXPERIMENTAL
+** METHOD: sqlite3_snapshot
**
** The sqlite3_snapshot_cmp(P1, P2) interface is used to compare the ages
** of two valid snapshot handles.
@@ -8694,6 +9117,9 @@ SQLITE_API SQLITE_EXPERIMENTAL void sqlite3_snapshot_free(sqlite3_snapshot*);
** Otherwise, this API returns a negative value if P1 refers to an older
** snapshot than P2, zero if the two handles refer to the same database
** snapshot, and a positive value if P1 is a newer snapshot than P2.
+**
+** This interface is only available if SQLite is compiled with the
+** [SQLITE_ENABLE_SNAPSHOT] option.
*/
SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_cmp(
sqlite3_snapshot *p1,
@@ -8702,26 +9128,151 @@ SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_cmp(
/*
** CAPI3REF: Recover snapshots from a wal file
-** EXPERIMENTAL
+** METHOD: sqlite3_snapshot
**
-** If all connections disconnect from a database file but do not perform
-** a checkpoint, the existing wal file is opened along with the database
-** file the next time the database is opened. At this point it is only
-** possible to successfully call sqlite3_snapshot_open() to open the most
-** recent snapshot of the database (the one at the head of the wal file),
-** even though the wal file may contain other valid snapshots for which
-** clients have sqlite3_snapshot handles.
+** If a [WAL file] remains on disk after all database connections close
+** (either through the use of the [SQLITE_FCNTL_PERSIST_WAL] [file control]
+** or because the last process to have the database opened exited without
+** calling [sqlite3_close()]) and a new connection is subsequently opened
+** on that database and [WAL file], the [sqlite3_snapshot_open()] interface
+** will only be able to open the last transaction added to the WAL file
+** even though the WAL file contains other valid transactions.
**
-** This function attempts to scan the wal file associated with database zDb
+** This function attempts to scan the WAL file associated with database zDb
** of database handle db and make all valid snapshots available to
** sqlite3_snapshot_open(). It is an error if there is already a read
-** transaction open on the database, or if the database is not a wal mode
+** transaction open on the database, or if the database is not a WAL mode
** database.
**
** SQLITE_OK is returned if successful, or an SQLite error code otherwise.
+**
+** This interface is only available if SQLite is compiled with the
+** [SQLITE_ENABLE_SNAPSHOT] option.
*/
SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_recover(sqlite3 *db, const char *zDb);
+/*
+** CAPI3REF: Serialize a database
+**
+** The sqlite3_serialize(D,S,P,F) interface returns a pointer to memory
+** that is a serialization of the S database on [database connection] D.
+** If P is not a NULL pointer, then the size of the database in bytes
+** is written into *P.
+**
+** For an ordinary on-disk database file, the serialization is just a
+** copy of the disk file. For an in-memory database or a "TEMP" database,
+** the serialization is the same sequence of bytes which would be written
+** to disk if that database where backed up to disk.
+**
+** The usual case is that sqlite3_serialize() copies the serialization of
+** the database into memory obtained from [sqlite3_malloc64()] and returns
+** a pointer to that memory. The caller is responsible for freeing the
+** returned value to avoid a memory leak. However, if the F argument
+** contains the SQLITE_SERIALIZE_NOCOPY bit, then no memory allocations
+** are made, and the sqlite3_serialize() function will return a pointer
+** to the contiguous memory representation of the database that SQLite
+** is currently using for that database, or NULL if the no such contiguous
+** memory representation of the database exists. A contiguous memory
+** representation of the database will usually only exist if there has
+** been a prior call to [sqlite3_deserialize(D,S,...)] with the same
+** values of D and S.
+** The size of the database is written into *P even if the
+** SQLITE_SERIALIZE_NOCOPY bit is set but no contiguous copy
+** of the database exists.
+**
+** A call to sqlite3_serialize(D,S,P,F) might return NULL even if the
+** SQLITE_SERIALIZE_NOCOPY bit is omitted from argument F if a memory
+** allocation error occurs.
+**
+** This interface is only available if SQLite is compiled with the
+** [SQLITE_ENABLE_DESERIALIZE] option.
+*/
+SQLITE_API unsigned char *sqlite3_serialize(
+ sqlite3 *db, /* The database connection */
+ const char *zSchema, /* Which DB to serialize. ex: "main", "temp", ... */
+ sqlite3_int64 *piSize, /* Write size of the DB here, if not NULL */
+ unsigned int mFlags /* Zero or more SQLITE_SERIALIZE_* flags */
+);
+
+/*
+** CAPI3REF: Flags for sqlite3_serialize
+**
+** Zero or more of the following constants can be OR-ed together for
+** the F argument to [sqlite3_serialize(D,S,P,F)].
+**
+** SQLITE_SERIALIZE_NOCOPY means that [sqlite3_serialize()] will return
+** a pointer to contiguous in-memory database that it is currently using,
+** without making a copy of the database. If SQLite is not currently using
+** a contiguous in-memory database, then this option causes
+** [sqlite3_serialize()] to return a NULL pointer. SQLite will only be
+** using a contiguous in-memory database if it has been initialized by a
+** prior call to [sqlite3_deserialize()].
+*/
+#define SQLITE_SERIALIZE_NOCOPY 0x001 /* Do no memory allocations */
+
+/*
+** CAPI3REF: Deserialize a database
+**
+** The sqlite3_deserialize(D,S,P,N,M,F) interface causes the
+** [database connection] D to disconnect from database S and then
+** reopen S as an in-memory database based on the serialization contained
+** in P. The serialized database P is N bytes in size. M is the size of
+** the buffer P, which might be larger than N. If M is larger than N, and
+** the SQLITE_DESERIALIZE_READONLY bit is not set in F, then SQLite is
+** permitted to add content to the in-memory database as long as the total
+** size does not exceed M bytes.
+**
+** If the SQLITE_DESERIALIZE_FREEONCLOSE bit is set in F, then SQLite will
+** invoke sqlite3_free() on the serialization buffer when the database
+** connection closes. If the SQLITE_DESERIALIZE_RESIZEABLE bit is set, then
+** SQLite will try to increase the buffer size using sqlite3_realloc64()
+** if writes on the database cause it to grow larger than M bytes.
+**
+** The sqlite3_deserialize() interface will fail with SQLITE_BUSY if the
+** database is currently in a read transaction or is involved in a backup
+** operation.
+**
+** If sqlite3_deserialize(D,S,P,N,M,F) fails for any reason and if the
+** SQLITE_DESERIALIZE_FREEONCLOSE bit is set in argument F, then
+** [sqlite3_free()] is invoked on argument P prior to returning.
+**
+** This interface is only available if SQLite is compiled with the
+** [SQLITE_ENABLE_DESERIALIZE] option.
+*/
+SQLITE_API int sqlite3_deserialize(
+ sqlite3 *db, /* The database connection */
+ const char *zSchema, /* Which DB to reopen with the deserialization */
+ unsigned char *pData, /* The serialized database content */
+ sqlite3_int64 szDb, /* Number bytes in the deserialization */
+ sqlite3_int64 szBuf, /* Total size of buffer pData[] */
+ unsigned mFlags /* Zero or more SQLITE_DESERIALIZE_* flags */
+);
+
+/*
+** CAPI3REF: Flags for sqlite3_deserialize()
+**
+** The following are allowed values for 6th argument (the F argument) to
+** the [sqlite3_deserialize(D,S,P,N,M,F)] interface.
+**
+** The SQLITE_DESERIALIZE_FREEONCLOSE means that the database serialization
+** in the P argument is held in memory obtained from [sqlite3_malloc64()]
+** and that SQLite should take ownership of this memory and automatically
+** free it when it has finished using it. Without this flag, the caller
+** is responsible for freeing any dynamically allocated memory.
+**
+** The SQLITE_DESERIALIZE_RESIZEABLE flag means that SQLite is allowed to
+** grow the size of the database using calls to [sqlite3_realloc64()]. This
+** flag should only be used if SQLITE_DESERIALIZE_FREEONCLOSE is also used.
+** Without this flag, the deserialized database cannot increase in size beyond
+** the number of bytes specified by the M parameter.
+**
+** The SQLITE_DESERIALIZE_READONLY flag means that the deserialized database
+** should be treated as read-only.
+*/
+#define SQLITE_DESERIALIZE_FREEONCLOSE 1 /* Call sqlite3_free() on close */
+#define SQLITE_DESERIALIZE_RESIZEABLE 2 /* Resize using sqlite3_realloc64() */
+#define SQLITE_DESERIALIZE_READONLY 4 /* Database is read-only */
+
/*
** Undo the hack that converts floating point types to integer for
** builds on processors without floating point support.
@@ -8869,16 +9420,23 @@ extern "C" {
/*
** CAPI3REF: Session Object Handle
+**
+** An instance of this object is a [session] that can be used to
+** record changes to a database.
*/
typedef struct sqlite3_session sqlite3_session;
/*
** CAPI3REF: Changeset Iterator Handle
+**
+** An instance of this object acts as a cursor for iterating
+** over the elements of a [changeset] or [patchset].
*/
typedef struct sqlite3_changeset_iter sqlite3_changeset_iter;
/*
** CAPI3REF: Create A New Session Object
+** CONSTRUCTOR: sqlite3_session
**
** Create a new session object attached to database handle db. If successful,
** a pointer to the new object is written to *ppSession and SQLITE_OK is
@@ -8915,6 +9473,7 @@ SQLITE_API int sqlite3session_create(
/*
** CAPI3REF: Delete A Session Object
+** DESTRUCTOR: sqlite3_session
**
** Delete a session object previously allocated using
** [sqlite3session_create()]. Once a session object has been deleted, the
@@ -8930,6 +9489,7 @@ SQLITE_API void sqlite3session_delete(sqlite3_session *pSession);
/*
** CAPI3REF: Enable Or Disable A Session Object
+** METHOD: sqlite3_session
**
** Enable or disable the recording of changes by a session object. When
** enabled, a session object records changes made to the database. When
@@ -8949,6 +9509,7 @@ SQLITE_API int sqlite3session_enable(sqlite3_session *pSession, int bEnable);
/*
** CAPI3REF: Set Or Clear the Indirect Change Flag
+** METHOD: sqlite3_session
**
** Each change recorded by a session object is marked as either direct or
** indirect. A change is marked as indirect if either:
@@ -8978,6 +9539,7 @@ SQLITE_API int sqlite3session_indirect(sqlite3_session *pSession, int bIndirect)
/*
** CAPI3REF: Attach A Table To A Session Object
+** METHOD: sqlite3_session
**
** If argument zTab is not NULL, then it is the name of a table to attach
** to the session object passed as the first argument. All subsequent changes
@@ -9003,6 +9565,35 @@ SQLITE_API int sqlite3session_indirect(sqlite3_session *pSession, int bIndirect)
**
** SQLITE_OK is returned if the call completes without error. Or, if an error
** occurs, an SQLite error code (e.g. SQLITE_NOMEM) is returned.
+**
+**
Special sqlite_stat1 Handling
+**
+** As of SQLite version 3.22.0, the "sqlite_stat1" table is an exception to
+** some of the rules above. In SQLite, the schema of sqlite_stat1 is:
+**
+** CREATE TABLE sqlite_stat1(tbl,idx,stat)
+**
+**
+** Even though sqlite_stat1 does not have a PRIMARY KEY, changes are
+** recorded for it as if the PRIMARY KEY is (tbl,idx). Additionally, changes
+** are recorded for rows for which (idx IS NULL) is true. However, for such
+** rows a zero-length blob (SQL value X'') is stored in the changeset or
+** patchset instead of a NULL value. This allows such changesets to be
+** manipulated by legacy implementations of sqlite3changeset_invert(),
+** concat() and similar.
+**
+** The sqlite3changeset_apply() function automatically converts the
+** zero-length blob back to a NULL value when updating the sqlite_stat1
+** table. However, if the application calls sqlite3changeset_new(),
+** sqlite3changeset_old() or sqlite3changeset_conflict on a changeset
+** iterator directly (including on a changeset iterator passed to a
+** conflict-handler callback) then the X'' value is returned. The application
+** must translate X'' to NULL itself if required.
+**
+** Legacy (older than 3.22.0) versions of the sessions module cannot capture
+** changes made to the sqlite_stat1 table. Legacy versions of the
+** sqlite3changeset_apply() function silently ignore any modifications to the
+** sqlite_stat1 table that are part of a changeset or patchset.
*/
SQLITE_API int sqlite3session_attach(
sqlite3_session *pSession, /* Session object */
@@ -9011,6 +9602,7 @@ SQLITE_API int sqlite3session_attach(
/*
** CAPI3REF: Set a table filter on a Session Object.
+** METHOD: sqlite3_session
**
** The second argument (xFilter) is the "filter callback". For changes to rows
** in tables that are not attached to the Session object, the filter is called
@@ -9029,6 +9621,7 @@ SQLITE_API void sqlite3session_table_filter(
/*
** CAPI3REF: Generate A Changeset From A Session Object
+** METHOD: sqlite3_session
**
** Obtain a changeset containing changes to the tables attached to the
** session object passed as the first argument. If successful,
@@ -9138,7 +9731,8 @@ SQLITE_API int sqlite3session_changeset(
);
/*
-** CAPI3REF: Load The Difference Between Tables Into A Session
+** CAPI3REF: Load The Difference Between Tables Into A Session
+** METHOD: sqlite3_session
**
** If it is not already attached to the session object passed as the first
** argument, this function attaches table zTbl in the same manner as the
@@ -9203,6 +9797,7 @@ SQLITE_API int sqlite3session_diff(
/*
** CAPI3REF: Generate A Patchset From A Session Object
+** METHOD: sqlite3_session
**
** The differences between a patchset and a changeset are that:
**
@@ -9254,6 +9849,7 @@ SQLITE_API int sqlite3session_isempty(sqlite3_session *pSession);
/*
** CAPI3REF: Create An Iterator To Traverse A Changeset
+** CONSTRUCTOR: sqlite3_changeset_iter
**
** Create an iterator used to iterate through the contents of a changeset.
** If successful, *pp is set to point to the iterator handle and SQLITE_OK
@@ -9294,6 +9890,7 @@ SQLITE_API int sqlite3changeset_start(
/*
** CAPI3REF: Advance A Changeset Iterator
+** METHOD: sqlite3_changeset_iter
**
** This function may only be used with iterators created by function
** [sqlite3changeset_start()]. If it is called on an iterator passed to
@@ -9318,6 +9915,7 @@ SQLITE_API int sqlite3changeset_next(sqlite3_changeset_iter *pIter);
/*
** CAPI3REF: Obtain The Current Operation From A Changeset Iterator
+** METHOD: sqlite3_changeset_iter
**
** The pIter argument passed to this function may either be an iterator
** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator
@@ -9352,6 +9950,7 @@ SQLITE_API int sqlite3changeset_op(
/*
** CAPI3REF: Obtain The Primary Key Definition Of A Table
+** METHOD: sqlite3_changeset_iter
**
** For each modified table, a changeset includes the following:
**
@@ -9383,6 +9982,7 @@ SQLITE_API int sqlite3changeset_pk(
/*
** CAPI3REF: Obtain old.* Values From A Changeset Iterator
+** METHOD: sqlite3_changeset_iter
**
** The pIter argument passed to this function may either be an iterator
** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator
@@ -9413,6 +10013,7 @@ SQLITE_API int sqlite3changeset_old(
/*
** CAPI3REF: Obtain new.* Values From A Changeset Iterator
+** METHOD: sqlite3_changeset_iter
**
** The pIter argument passed to this function may either be an iterator
** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator
@@ -9446,6 +10047,7 @@ SQLITE_API int sqlite3changeset_new(
/*
** CAPI3REF: Obtain Conflicting Row Values From A Changeset Iterator
+** METHOD: sqlite3_changeset_iter
**
** This function should only be used with iterator objects passed to a
** conflict-handler callback by [sqlite3changeset_apply()] with either
@@ -9473,6 +10075,7 @@ SQLITE_API int sqlite3changeset_conflict(
/*
** CAPI3REF: Determine The Number Of Foreign Key Constraint Violations
+** METHOD: sqlite3_changeset_iter
**
** This function may only be called with an iterator passed to an
** SQLITE_CHANGESET_FOREIGN_KEY conflict handler callback. In this case
@@ -9489,6 +10092,7 @@ SQLITE_API int sqlite3changeset_fk_conflicts(
/*
** CAPI3REF: Finalize A Changeset Iterator
+** METHOD: sqlite3_changeset_iter
**
** This function is used to finalize an iterator allocated with
** [sqlite3changeset_start()].
@@ -9505,6 +10109,7 @@ SQLITE_API int sqlite3changeset_fk_conflicts(
** to that error is returned by this function. Otherwise, SQLITE_OK is
** returned. This is to allow the following pattern (pseudo-code):
**
+**
** sqlite3changeset_start();
** while( SQLITE_ROW==sqlite3changeset_next() ){
** // Do something with change.
@@ -9513,6 +10118,7 @@ SQLITE_API int sqlite3changeset_fk_conflicts(
** if( rc!=SQLITE_OK ){
** // An error has occurred
** }
+**
*/
SQLITE_API int sqlite3changeset_finalize(sqlite3_changeset_iter *pIter);
@@ -9560,6 +10166,7 @@ SQLITE_API int sqlite3changeset_invert(
** sqlite3_changegroup object. Calling it produces similar results as the
** following code fragment:
**
+**
** sqlite3_changegroup *pGrp;
** rc = sqlite3_changegroup_new(&pGrp);
** if( rc==SQLITE_OK ) rc = sqlite3changegroup_add(pGrp, nA, pA);
@@ -9570,6 +10177,7 @@ SQLITE_API int sqlite3changeset_invert(
** *ppOut = 0;
** *pnOut = 0;
** }
+**
**
** Refer to the sqlite3_changegroup documentation below for details.
*/
@@ -9585,11 +10193,15 @@ SQLITE_API int sqlite3changeset_concat(
/*
** CAPI3REF: Changegroup Handle
+**
+** A changegroup is an object used to combine two or more
+** [changesets] or [patchsets]
*/
typedef struct sqlite3_changegroup sqlite3_changegroup;
/*
** CAPI3REF: Create A New Changegroup Object
+** CONSTRUCTOR: sqlite3_changegroup
**
** An sqlite3_changegroup object is used to combine two or more changesets
** (or patchsets) into a single changeset (or patchset). A single changegroup
@@ -9627,6 +10239,7 @@ SQLITE_API int sqlite3changegroup_new(sqlite3_changegroup **pp);
/*
** CAPI3REF: Add A Changeset To A Changegroup
+** METHOD: sqlite3_changegroup
**
** Add all changes within the changeset (or patchset) in buffer pData (size
** nData bytes) to the changegroup.
@@ -9704,6 +10317,7 @@ SQLITE_API int sqlite3changegroup_add(sqlite3_changegroup*, int nData, void *pDa
/*
** CAPI3REF: Obtain A Composite Changeset From A Changegroup
+** METHOD: sqlite3_changegroup
**
** Obtain a buffer containing a changeset (or patchset) representing the
** current contents of the changegroup. If the inputs to the changegroup
@@ -9734,25 +10348,25 @@ SQLITE_API int sqlite3changegroup_output(
/*
** CAPI3REF: Delete A Changegroup Object
+** DESTRUCTOR: sqlite3_changegroup
*/
SQLITE_API void sqlite3changegroup_delete(sqlite3_changegroup*);
/*
** CAPI3REF: Apply A Changeset To A Database
**
-** Apply a changeset to a database. This function attempts to update the
-** "main" database attached to handle db with the changes found in the
-** changeset passed via the second and third arguments.
+** Apply a changeset or patchset to a database. These functions attempt to
+** update the "main" database attached to handle db with the changes found in
+** the changeset passed via the second and third arguments.
**
-** The fourth argument (xFilter) passed to this function is the "filter
+** The fourth argument (xFilter) passed to these functions is the "filter
** callback". If it is not NULL, then for each table affected by at least one
** change in the changeset, the filter callback is invoked with
** the table name as the second argument, and a copy of the context pointer
-** passed as the sixth argument to this function as the first. If the "filter
-** callback" returns zero, then no attempt is made to apply any changes to
-** the table. Otherwise, if the return value is non-zero or the xFilter
-** argument to this function is NULL, all changes related to the table are
-** attempted.
+** passed as the sixth argument as the first. If the "filter callback"
+** returns zero, then no attempt is made to apply any changes to the table.
+** Otherwise, if the return value is non-zero or the xFilter argument to
+** is NULL, all changes related to the table are attempted.
**
** For each table that is not excluded by the filter callback, this function
** tests that the target database contains a compatible table. A table is
@@ -9797,7 +10411,7 @@ SQLITE_API void sqlite3changegroup_delete(sqlite3_changegroup*);
**
**
** - DELETE Changes
-
-** For each DELETE change, this function checks if the target database
+** For each DELETE change, the function checks if the target database
** contains a row with the same primary key value (or values) as the
** original row values stored in the changeset. If it does, and the values
** stored in all non-primary key columns also match the values stored in
@@ -9842,7 +10456,7 @@ SQLITE_API void sqlite3changegroup_delete(sqlite3_changegroup*);
** [SQLITE_CHANGESET_REPLACE].
**
**
- UPDATE Changes
-
-** For each UPDATE change, this function checks if the target database
+** For each UPDATE change, the function checks if the target database
** contains a row with the same primary key value (or values) as the
** original row values stored in the changeset. If it does, and the values
** stored in all modified non-primary key columns also match the values
@@ -9873,11 +10487,28 @@ SQLITE_API void sqlite3changegroup_delete(sqlite3_changegroup*);
** This can be used to further customize the applications conflict
** resolution strategy.
**
-** All changes made by this function are enclosed in a savepoint transaction.
+** All changes made by these functions are enclosed in a savepoint transaction.
** If any other error (aside from a constraint failure when attempting to
** write to the target database) occurs, then the savepoint transaction is
** rolled back, restoring the target database to its original state, and an
** SQLite error code returned.
+**
+** If the output parameters (ppRebase) and (pnRebase) are non-NULL and
+** the input is a changeset (not a patchset), then sqlite3changeset_apply_v2()
+** may set (*ppRebase) to point to a "rebase" that may be used with the
+** sqlite3_rebaser APIs buffer before returning. In this case (*pnRebase)
+** is set to the size of the buffer in bytes. It is the responsibility of the
+** caller to eventually free any such buffer using sqlite3_free(). The buffer
+** is only allocated and populated if one or more conflicts were encountered
+** while applying the patchset. See comments surrounding the sqlite3_rebaser
+** APIs for further details.
+**
+** The behavior of sqlite3changeset_apply_v2() and its streaming equivalent
+** may be modified by passing a combination of
+** [SQLITE_CHANGESETAPPLY_NOSAVEPOINT | supported flags] as the 9th parameter.
+**
+** Note that the sqlite3changeset_apply_v2() API is still experimental
+** and therefore subject to change.
*/
SQLITE_API int sqlite3changeset_apply(
sqlite3 *db, /* Apply change to "main" db of this handle */
@@ -9894,6 +10525,41 @@ SQLITE_API int sqlite3changeset_apply(
),
void *pCtx /* First argument passed to xConflict */
);
+SQLITE_API int sqlite3changeset_apply_v2(
+ sqlite3 *db, /* Apply change to "main" db of this handle */
+ int nChangeset, /* Size of changeset in bytes */
+ void *pChangeset, /* Changeset blob */
+ int(*xFilter)(
+ void *pCtx, /* Copy of sixth arg to _apply() */
+ const char *zTab /* Table name */
+ ),
+ int(*xConflict)(
+ void *pCtx, /* Copy of sixth arg to _apply() */
+ int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */
+ sqlite3_changeset_iter *p /* Handle describing change and conflict */
+ ),
+ void *pCtx, /* First argument passed to xConflict */
+ void **ppRebase, int *pnRebase, /* OUT: Rebase data */
+ int flags /* Combination of SESSION_APPLY_* flags */
+);
+
+/*
+** CAPI3REF: Flags for sqlite3changeset_apply_v2
+**
+** The following flags may passed via the 9th parameter to
+** [sqlite3changeset_apply_v2] and [sqlite3changeset_apply_v2_strm]:
+**
+**
+** - SQLITE_CHANGESETAPPLY_NOSAVEPOINT
-
+** Usually, the sessions module encloses all operations performed by
+** a single call to apply_v2() or apply_v2_strm() in a [SAVEPOINT]. The
+** SAVEPOINT is committed if the changeset or patchset is successfully
+** applied, or rolled back if an error occurs. Specifying this flag
+** causes the sessions module to omit this savepoint. In this case, if the
+** caller has an open transaction or savepoint when apply_v2() is called,
+** it may revert the partially applied changeset by rolling it back.
+*/
+#define SQLITE_CHANGESETAPPLY_NOSAVEPOINT 0x0001
/*
** CAPI3REF: Constants Passed To The Conflict Handler
@@ -9991,6 +10657,161 @@ SQLITE_API int sqlite3changeset_apply(
#define SQLITE_CHANGESET_REPLACE 1
#define SQLITE_CHANGESET_ABORT 2
+/*
+** CAPI3REF: Rebasing changesets
+** EXPERIMENTAL
+**
+** Suppose there is a site hosting a database in state S0. And that
+** modifications are made that move that database to state S1 and a
+** changeset recorded (the "local" changeset). Then, a changeset based
+** on S0 is received from another site (the "remote" changeset) and
+** applied to the database. The database is then in state
+** (S1+"remote"), where the exact state depends on any conflict
+** resolution decisions (OMIT or REPLACE) made while applying "remote".
+** Rebasing a changeset is to update it to take those conflict
+** resolution decisions into account, so that the same conflicts
+** do not have to be resolved elsewhere in the network.
+**
+** For example, if both the local and remote changesets contain an
+** INSERT of the same key on "CREATE TABLE t1(a PRIMARY KEY, b)":
+**
+** local: INSERT INTO t1 VALUES(1, 'v1');
+** remote: INSERT INTO t1 VALUES(1, 'v2');
+**
+** and the conflict resolution is REPLACE, then the INSERT change is
+** removed from the local changeset (it was overridden). Or, if the
+** conflict resolution was "OMIT", then the local changeset is modified
+** to instead contain:
+**
+** UPDATE t1 SET b = 'v2' WHERE a=1;
+**
+** Changes within the local changeset are rebased as follows:
+**
+**
+** - Local INSERT
-
+** This may only conflict with a remote INSERT. If the conflict
+** resolution was OMIT, then add an UPDATE change to the rebased
+** changeset. Or, if the conflict resolution was REPLACE, add
+** nothing to the rebased changeset.
+**
+**
- Local DELETE
-
+** This may conflict with a remote UPDATE or DELETE. In both cases the
+** only possible resolution is OMIT. If the remote operation was a
+** DELETE, then add no change to the rebased changeset. If the remote
+** operation was an UPDATE, then the old.* fields of change are updated
+** to reflect the new.* values in the UPDATE.
+**
+**
- Local UPDATE
-
+** This may conflict with a remote UPDATE or DELETE. If it conflicts
+** with a DELETE, and the conflict resolution was OMIT, then the update
+** is changed into an INSERT. Any undefined values in the new.* record
+** from the update change are filled in using the old.* values from
+** the conflicting DELETE. Or, if the conflict resolution was REPLACE,
+** the UPDATE change is simply omitted from the rebased changeset.
+**
+** If conflict is with a remote UPDATE and the resolution is OMIT, then
+** the old.* values are rebased using the new.* values in the remote
+** change. Or, if the resolution is REPLACE, then the change is copied
+** into the rebased changeset with updates to columns also updated by
+** the conflicting remote UPDATE removed. If this means no columns would
+** be updated, the change is omitted.
+**
+**
+** A local change may be rebased against multiple remote changes
+** simultaneously. If a single key is modified by multiple remote
+** changesets, they are combined as follows before the local changeset
+** is rebased:
+**
+**
+** - If there has been one or more REPLACE resolutions on a
+** key, it is rebased according to a REPLACE.
+**
+**
- If there have been no REPLACE resolutions on a key, then
+** the local changeset is rebased according to the most recent
+** of the OMIT resolutions.
+**
+**
+** Note that conflict resolutions from multiple remote changesets are
+** combined on a per-field basis, not per-row. This means that in the
+** case of multiple remote UPDATE operations, some fields of a single
+** local change may be rebased for REPLACE while others are rebased for
+** OMIT.
+**
+** In order to rebase a local changeset, the remote changeset must first
+** be applied to the local database using sqlite3changeset_apply_v2() and
+** the buffer of rebase information captured. Then:
+**
+**
+** - An sqlite3_rebaser object is created by calling
+** sqlite3rebaser_create().
+**
- The new object is configured with the rebase buffer obtained from
+** sqlite3changeset_apply_v2() by calling sqlite3rebaser_configure().
+** If the local changeset is to be rebased against multiple remote
+** changesets, then sqlite3rebaser_configure() should be called
+** multiple times, in the same order that the multiple
+** sqlite3changeset_apply_v2() calls were made.
+**
- Each local changeset is rebased by calling sqlite3rebaser_rebase().
+**
- The sqlite3_rebaser object is deleted by calling
+** sqlite3rebaser_delete().
+**
+*/
+typedef struct sqlite3_rebaser sqlite3_rebaser;
+
+/*
+** CAPI3REF: Create a changeset rebaser object.
+** EXPERIMENTAL
+**
+** Allocate a new changeset rebaser object. If successful, set (*ppNew) to
+** point to the new object and return SQLITE_OK. Otherwise, if an error
+** occurs, return an SQLite error code (e.g. SQLITE_NOMEM) and set (*ppNew)
+** to NULL.
+*/
+SQLITE_API int sqlite3rebaser_create(sqlite3_rebaser **ppNew);
+
+/*
+** CAPI3REF: Configure a changeset rebaser object.
+** EXPERIMENTAL
+**
+** Configure the changeset rebaser object to rebase changesets according
+** to the conflict resolutions described by buffer pRebase (size nRebase
+** bytes), which must have been obtained from a previous call to
+** sqlite3changeset_apply_v2().
+*/
+SQLITE_API int sqlite3rebaser_configure(
+ sqlite3_rebaser*,
+ int nRebase, const void *pRebase
+);
+
+/*
+** CAPI3REF: Rebase a changeset
+** EXPERIMENTAL
+**
+** Argument pIn must point to a buffer containing a changeset nIn bytes
+** in size. This function allocates and populates a buffer with a copy
+** of the changeset rebased rebased according to the configuration of the
+** rebaser object passed as the first argument. If successful, (*ppOut)
+** is set to point to the new buffer containing the rebased changset and
+** (*pnOut) to its size in bytes and SQLITE_OK returned. It is the
+** responsibility of the caller to eventually free the new buffer using
+** sqlite3_free(). Otherwise, if an error occurs, (*ppOut) and (*pnOut)
+** are set to zero and an SQLite error code returned.
+*/
+SQLITE_API int sqlite3rebaser_rebase(
+ sqlite3_rebaser*,
+ int nIn, const void *pIn,
+ int *pnOut, void **ppOut
+);
+
+/*
+** CAPI3REF: Delete a changeset rebaser object.
+** EXPERIMENTAL
+**
+** Delete the changeset rebaser object and all associated resources. There
+** should be one call to this function for each successful invocation
+** of sqlite3rebaser_create().
+*/
+SQLITE_API void sqlite3rebaser_delete(sqlite3_rebaser *p);
+
/*
** CAPI3REF: Streaming Versions of API functions.
**
@@ -10000,6 +10821,7 @@ SQLITE_API int sqlite3changeset_apply(
**
** Streaming function | Non-streaming equivalent |
**
---|
sqlite3changeset_apply_strm | [sqlite3changeset_apply]
+** | sqlite3changeset_apply_strm_v2 | [sqlite3changeset_apply_v2]
** | sqlite3changeset_concat_strm | [sqlite3changeset_concat]
** | sqlite3changeset_invert_strm | [sqlite3changeset_invert]
** | sqlite3changeset_start_strm | [sqlite3changeset_start]
@@ -10095,6 +10917,23 @@ SQLITE_API int sqlite3changeset_apply_strm(
),
void *pCtx /* First argument passed to xConflict */
);
+SQLITE_API int sqlite3changeset_apply_v2_strm(
+ sqlite3 *db, /* Apply change to "main" db of this handle */
+ int (*xInput)(void *pIn, void *pData, int *pnData), /* Input function */
+ void *pIn, /* First arg for xInput */
+ int(*xFilter)(
+ void *pCtx, /* Copy of sixth arg to _apply() */
+ const char *zTab /* Table name */
+ ),
+ int(*xConflict)(
+ void *pCtx, /* Copy of sixth arg to _apply() */
+ int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */
+ sqlite3_changeset_iter *p /* Handle describing change and conflict */
+ ),
+ void *pCtx, /* First argument passed to xConflict */
+ void **ppRebase, int *pnRebase,
+ int flags
+);
SQLITE_API int sqlite3changeset_concat_strm(
int (*xInputA)(void *pIn, void *pData, int *pnData),
void *pInA,
@@ -10132,6 +10971,13 @@ SQLITE_API int sqlite3changegroup_output_strm(sqlite3_changegroup*,
int (*xOutput)(void *pOut, const void *pData, int nData),
void *pOut
);
+SQLITE_API int sqlite3rebaser_rebase_strm(
+ sqlite3_rebaser *pRebaser,
+ int (*xInput)(void *pIn, void *pData, int *pnData),
+ void *pIn,
+ int (*xOutput)(void *pOut, const void *pData, int nData),
+ void *pOut
+);
/*
@@ -10590,7 +11436,7 @@ struct Fts5ExtensionApi {
** This way, even if the tokenizer does not provide synonyms
** when tokenizing query text (it should not - to do would be
** inefficient), it doesn't matter if the user queries for
-** 'first + place' or '1st + place', as there are entires in the
+** 'first + place' or '1st + place', as there are entries in the
** FTS index corresponding to both forms of the first token.
**
**
@@ -10618,7 +11464,7 @@ struct Fts5ExtensionApi {
** extra data to the FTS index or require FTS5 to query for multiple terms,
** so it is efficient in terms of disk space and query speed. However, it
** does not support prefix queries very well. If, as suggested above, the
-** token "first" is subsituted for "1st" by the tokenizer, then the query:
+** token "first" is substituted for "1st" by the tokenizer, then the query:
**
**
** ... MATCH '1s*'
| |