From: Richard Burgess <>
Date: Mon, 5 Dec 1994 18:48:16 +0000 (+0000)
Subject: autocommit for file dated 1994-12-05 18:48:16
X-Git-Url: https://pd.if.org/git/?p=mmurtl;a=commitdiff_plain;h=bad464cac04614b85376cf89c05b7e7e4df6b166

autocommit for file dated 1994-12-05 18:48:16
---

diff --git a/ossource/rs232.h b/ossource/rs232.h
new file mode 100644
index 0000000..7b1a7de
--- /dev/null
+++ b/ossource/rs232.h
@@ -0,0 +1,65 @@
+/*   RS232.H     */
+
+#define MIN_BAUD       150l
+#define MAX_BAUD       38400l
+#define NO_PAR             0
+#define EV_PAR             1
+#define OD_PAR             2
+
+#define ErcRecvTimeout	800		/* Recv Buffer Empty */
+#define ErcXmitTimeout	801		/* Xmit Buffer never Emptied */
+#define ErcRcvBufOvr 	802		/* Receive buffer overrun */
+#define ErcBadPort 		803		/* Invalid port on OpenCommC */
+#define ErcRcvBufOvr	805		/* Buffer full!!! */
+#define ErcNotOpen		807		/* Channel not open... */
+#define ErcChannelOpen	809		/* It's already open... */
+#define ErcNotOwner		812		/* It's opened by someone else... */
+#define ErcBadBaud		820		/* 150-38400      */
+#define ErcBadParity	821		/* 0, 1 or 2      */
+#define ErcBadDataBits	822		/* Must be 5-8    */
+#define ErcBadStopBits	823		/* Must be 1 or 2 */
+#define ErcBadIOBase	824		/* if 0           */
+#define ErcBadCommIRQ	825		/* < 3            */
+#define ErcBadInitSize	827		/* At least 40 bytes for this version */
+
+
+struct statRecC{
+  unsigned long commJob;	/* Owner of this comms port, 0 for not in use */
+  unsigned long LastErc;	/* Result of last device operation */
+  unsigned long LastTotal;	/* Total bytes moved in last operation */
+  unsigned long Baudrate;	/* Baudrate for this port, 150 - 38400 */
+  unsigned char parity; 	/* Parity for this port, 0=none, 1=even, 2=odd */
+  unsigned char databits;	/* nDatabits for this port, 5-8 */
+  unsigned char stopbits;	/* stop bits for this port, 1 or 2 */
+  unsigned char IRQNum;		/* IRQNum for this channel */
+  unsigned long IOBase;		/* IO base address for hardware */
+  unsigned long XBufSize;	/* Size of Xmit buffer */
+  unsigned long RBufSize;	/* Size of Recv Buffer */
+  unsigned long XTimeOut;	/* Xmit Timeout in 10ms increments */
+  unsigned long RTimeOut;	/* Recv Timeout in 10ms increments */
+  unsigned long resvd[6];	/* out to 64 bytes */
+  };
+
+/* Device Driver interface commands (Op numbers) */
+
+#define CmdReadRec   1			/* Read one or more bytes */
+#define CmdWriteRec  2			/* Write one or more bytes */
+#define CmdOpenC    10			/* Open Comm Channel */
+#define CmdCloseC   11			/* Close Comm Channel */
+#define CmdDiscardRcv 12		/* Trash input buffer */
+#define CmdSetRTO	13          /* Set Recv timeout 10ms incs in dLBA */
+#define CmdSetXTO	14          /* Set Xmit timeout 10ms incs in dLBA */
+#define CmdSetDTR   15			/* Set DTR (On) */
+#define CmdSetRTS	16			/* Set CTS (On) */
+#define CmdReSetDTR 17			/* Set DTR (On) */
+#define CmdReSetRTS 18			/* Set CTS (On) */
+#define CmdBreak	19			/* Send BREAK (10ms incs in dLBA) */
+#define CmdGetDC	20			/* Returns byte TRUE to pData if CD ON */
+#define CmdGetDSR	21			/* Returns byte TRUE to pData if DSR ON */
+#define CmdGetCTS	22			/* Returns byte TRUE to pData if CTS ON */
+#define CmdGetRI	23			/* Returns byte TRUE to pData if RI ON */
+#define CmdReadB	31			/* Recv a single byte */
+#define CmdWriteB	32			/* Xmit a single byte */
+
+
+/*********************** END of COMMDRV.H *****************************/