/* specific platforms, e.g. by swapping int instead of char. */
#define _PDCLIB_memswp( i, j, size ) char tmp; do { tmp = *i; *i++ = *j; *j++ = tmp; } while ( --size );
-/* The maximum value that errno can be set to. This is used to set the size */
-/* of the array in struct lconv (<locale.h>) holding error messages for the */
-/* strerror() and perror() functions. (If you change this value because you */
-/* are using additional errno values, you *HAVE* to provide appropriate error */
-/* messages for *ALL* locales.) */
-/* Default is 4 (0, ERANGE, EDOM, EILSEQ). */
-#define _PDCLIB_ERRNO_MAX 4
-
/* -------------------------------------------------------------------------- */
/* Integers */
/* -------------------------------------------------------------------------- */
/* first, before going to lengths about it. */
/* -------------------------------------------------------------------------- */
-/* Comment out (or delete) the line below if your 'char' type is unsigned. */
+/* Set to 0 if your 'char' type is unsigned. */
#define _PDCLIB_CHAR_SIGNED 1
/* Width of the integer types short, int, long, and long long, in bytes. */
/* compiler manuals. */
#define _PDCLIB_SHRT_BYTES 2
#define _PDCLIB_INT_BYTES 4
-#define _PDCLIB_LONG_BYTES 4
+#if defined(__LP64__) || defined(_LP64)
+# define _PDCLIB_LONG_BYTES 8
+#else
+# define _PDCLIB_LONG_BYTES 4
+#endif
#define _PDCLIB_LLONG_BYTES 8
/* <stdlib.h> defines the div() function family that allows taking quotient */
/* -------------------------------------------------------------------------- */
/* The result type of substracting two pointers */
-#define _PDCLIB_ptrdiff int
-#define _PDCLIB_PTRDIFF INT
+#define _PDCLIB_ptrdiff long
+#define _PDCLIB_PTRDIFF LONG
#define _PDCLIB_PTR_CONV
/* An integer type that can be accessed as atomic entity (think asynchronous
#define _PDCLIB_SIG_ATOMIC INT
/* Result type of the 'sizeof' operator (must be unsigned) */
-#define _PDCLIB_size unsigned int
-#define _PDCLIB_SIZE UINT
+#define _PDCLIB_size unsigned long
+#define _PDCLIB_SIZE ULONG
/* Large enough an integer to hold all character codes of the largest supported
locale.
#define _PDCLIB_wchar unsigned int
#define _PDCLIB_WCHAR UINT
-#define _PDCLIB_intptr int
-#define _PDCLIB_INTPTR INT
+#define _PDCLIB_intptr long
+#define _PDCLIB_INTPTR LONG
/* Largest supported integer type. Implementation note: see _PDCLIB_atomax(). */
#define _PDCLIB_intmax long long int
*/
#define _PDCLIB_DECIMAL_DIG 17
+/* Floating point types
+ *
+ * PDCLib (at present) assumes IEEE 754 floating point formats
+ * The following names are used:
+ * SINGLE: IEEE 754 single precision (32-bit)
+ * DOUBLE: IEEE 754 double precision (64-bit)
+ * EXTENDED: IEEE 754 extended precision (80-bit, as x87)
+ */
+#define _PDCLIB_FLOAT_TYPE SINGLE
+#define _PDCLIB_DOUBLE_TYPE DOUBLE
+#if defined(__i386__) || defined(__amd64__)
+ #define _PDCLIB_LDOUBLE_TYPE EXTENDED
+#else
+ #define _PDCLIB_LDOUBLE_TYPE DOUBLE
+#endif
+
/* -------------------------------------------------------------------------- */
/* Platform-dependent macros defined by the standard headers. */
/* -------------------------------------------------------------------------- */
/* TODO: Better document these */
-/* I/O ---------------------------------------------------------------------- */
+/* Locale --------------------------------------------------------------------*/
-/* The type of the file descriptor returned by _PDCLIB_open(). */
-typedef int _PDCLIB_fd_t;
+/* Locale method. See _PDCLIB_locale.h */
+/* #define _PDCLIB_LOCALE_METHOD _PDCLIB_LOCALE_METHOD_TSS */
-/* The value (of type _PDCLIB_fd_t) returned by _PDCLIB_open() if the operation
- failed.
-*/
-#define _PDCLIB_NOHANDLE ( (_PDCLIB_fd_t) -1 )
+/* wchar_t encoding */
+#define _PDCLIB_WCHAR_ENCODING _PDCLIB_WCHAR_ENCODING_UCS4
+
+/* I/O ---------------------------------------------------------------------- */
/* The default size for file buffers. Must be at least 256. */
#define _PDCLIB_BUFSIZ 1024
prefix removed by <errno.h> mechanics).
If you do not want that kind of translation, you might want to "match" the
- values used by PDCLib with those used by the host OS, as to avoid confusion.
+ values used by PDCLib with those used by the host OS, to avoid confusion.
The C standard only defines three distinct errno values: ERANGE, EDOM, and
EILSEQ. The standard leaves it up to "the implementation" whether there are
- any more beyond those three. There is some controversy as to whether errno is
- such a good idea at all, so you might want to come up with a different error
- reporting facility for your platform.
-
- Things used to say "Since errno values beyond the three defined by the
- standard are not portable anyway (unless you look at POSIX), having your own
- error reporting facility would not hurt anybody either." at this point.
- However, then somebody birthed C++11 into the world, which copied POSIX's
- errno values into C++. Yes, even EINTR. Therefore, this library defines
- them. That said, thats nothing stopping you from using your own error
- reporting facility for things outside the C library.
+ any more beyond those three.
+
+ However, C++11 introduced the whole list of POSIX errno values into the
+ standard, so PDCLib might as well define those as well.
Sometimes the standard says to set errno to indicate an error, but does not
prescribe a value. We will use a value from the following list. If POSIX
defines a value, we use that; otherwise, we use as seems suitable.
-
- If porting to a system which uses an errno-like reporting system (e.g. a
- UNIX), you'll probably want to define them to match what the OS uses
*/
-/* C errno values */
-#define _PDCLIB_ERANGE 1
-#define _PDCLIB_EDOM 2
-#define _PDCLIB_EILSEQ 3
-
-/* C++11/POSIX errno values */
-#define _PDCLIB_E2BIG 4
-#define _PDCLIB_ECONNRESET 5
-#define _PDCLIB_EISCONN 6
-#define _PDCLIB_ENOENT 7
-#define _PDCLIB_ENOTRECOVERABLE 8
-#define _PDCLIB_EROFS 9
-#define _PDCLIB_EACCES 10
-#define _PDCLIB_EDEADLK 11
-#define _PDCLIB_EISDIR 12
-#define _PDCLIB_ENOEXEC 13
-#define _PDCLIB_ENOTSOCK 14
-#define _PDCLIB_ESPIPE 15
-#define _PDCLIB_EADDRINUSE 16
-#define _PDCLIB_EDESTADDRREQ 17
-#define _PDCLIB_ELOOP 18
-#define _PDCLIB_ENOLCK 19
-#define _PDCLIB_ENOTSUPP 20
-#define _PDCLIB_ESRCH 21
-#define _PDCLIB_EADDRNOTAVAIL 22
-#define _PDCLIB_EMFILE 23
-#define _PDCLIB_ENOLINK 24
-#define _PDCLIB_ENOTTY 25
-#define _PDCLIB_ETIME 26
-#define _PDCLIB_EAFNOSUPPORT 27
-#define _PDCLIB_EEXIST 28
-#define _PDCLIB_EMLINK 29
-#define _PDCLIB_ENOMEM 30
-#define _PDCLIB_ENXIO 31
-#define _PDCLIB_ETIMEDOUT 32
-#define _PDCLIB_EAGAIN 33
-#define _PDCLIB_EFAULT 34
-#define _PDCLIB_EMSGSIZE 35
-#define _PDCLIB_ENOMSG 36
-#define _PDCLIB_EOPNOTSUPP 37
-#define _PDCLIB_ETXTBSY 38
-#define _PDCLIB_EALREADY 39
-#define _PDCLIB_EFBIG 40
-#define _PDCLIB_ENAMETOOLONG 41
-#define _PDCLIB_ENOPROTOOPT 42
-#define _PDCLIB_EOVERFLOW 43
-#define _PDCLIB_EWOULDBLOCK _PDCLIB_EAGAIN
-#define _PDCLIB_EBADF 44
-#define _PDCLIB_EHOSTUNREACH 45
-#define _PDCLIB_ENETDOWN 46
-#define _PDCLIB_ENOSPC 47
-#define _PDCLIB_EOWNERDEAD 48
-#define _PDCLIB_EXDEV 49
-#define _PDCLIB_EBADMSG 50
-#define _PDCLIB_EIDRM 51
-#define _PDCLIB_ENETRESET 52
-#define _PDCLIB_ENOSR 53
-#define _PDCLIB_EPERM 54
-#define _PDCLIB_EBUSY 55
-#define _PDCLIB_ENETUNREACH 56
-#define _PDCLIB_ENOSTR 57
-#define _PDCLIB_EPIPE 58
-#define _PDCLIB_ECANCELED 59
-#define _PDCLIB_EINPROGRESS 60
-#define _PDCLIB_ENFILE 61
-#define _PDCLIB_ENOSYS 62
-#define _PDCLIB_EPROTO 63
-#define _PDCLIB_ECHILD 64
-#define _PDCLIB_EINTR 65
-#define _PDCLIB_ENOBUFS 66
-#define _PDCLIB_ENOTCONN 67
-#define _PDCLIB_EPROTONOSUPPORT 68
-#define _PDCLIB_ECONNABORTED 69
-#define _PDCLIB_EINVAL 70
-#define _PDCLIB_ENODATA 71
-#define _PDCLIB_ENOTDIR 72
-#define _PDCLIB_EPROTOTYPE 73
+
+/* These values were taken from Linux, gcc 4.8. */
+#define _PDCLIB_E2BIG 7
+#define _PDCLIB_EACCES 13
+#define _PDCLIB_EADDRINUSE 98
+#define _PDCLIB_EADDRNOTAVAIL 99
+#define _PDCLIB_EAFNOSUPPORT 97
+#define _PDCLIB_EAGAIN 11
+#define _PDCLIB_EALREADY 114
+#define _PDCLIB_EBADF 9
+#define _PDCLIB_EBADMSG 74
+#define _PDCLIB_EBUSY 16
+#define _PDCLIB_ECANCELED 125
+#define _PDCLIB_ECHILD 10
+#define _PDCLIB_ECONNABORTED 103
+#define _PDCLIB_ECONNREFUSED 111
+#define _PDCLIB_ECONNRESET 104
+#define _PDCLIB_EDEADLK 35
+#define _PDCLIB_EDESTADDRREQ 89
+#define _PDCLIB_EDOM 33
+#define _PDCLIB_EEXIST 17
+#define _PDCLIB_EFAULT 14
+#define _PDCLIB_EFBIG 27
+#define _PDCLIB_EHOSTUNREACH 113
+#define _PDCLIB_EIDRM 43
+#define _PDCLIB_EILSEQ 84
+#define _PDCLIB_EINPROGRESS 115
+#define _PDCLIB_EINTR 4
+#define _PDCLIB_EINVAL 22
+#define _PDCLIB_EIO 5
+#define _PDCLIB_EISCONN 106
+#define _PDCLIB_EISDIR 21
+#define _PDCLIB_ELOOP 40
+#define _PDCLIB_EMFILE 24
+#define _PDCLIB_EMLINK 31
+#define _PDCLIB_EMSGSIZE 90
+#define _PDCLIB_ENAMETOOLONG 36
+#define _PDCLIB_ENETDOWN 100
+#define _PDCLIB_ENETRESET 102
+#define _PDCLIB_ENETUNREACH 101
+#define _PDCLIB_ENFILE 23
+#define _PDCLIB_ENOBUFS 105
+#define _PDCLIB_ENODATA 61
+#define _PDCLIB_ENODEV 19
+#define _PDCLIB_ENOENT 2
+#define _PDCLIB_ENOEXEC 8
+#define _PDCLIB_ENOLCK 37
+#define _PDCLIB_ENOLINK 67
+#define _PDCLIB_ENOMEM 12
+#define _PDCLIB_ENOMSG 42
+#define _PDCLIB_ENOPROTOOPT 92
+#define _PDCLIB_ENOSPC 28
+#define _PDCLIB_ENOSR 63
+#define _PDCLIB_ENOSTR 60
+#define _PDCLIB_ENOSYS 38
+#define _PDCLIB_ENOTCONN 107
+#define _PDCLIB_ENOTDIR 20
+#define _PDCLIB_ENOTEMPTY 39
+#define _PDCLIB_ENOTRECOVERABLE 131
+#define _PDCLIB_ENOTSOCK 88
+#define _PDCLIB_ENOTSUP 95
+#define _PDCLIB_ENOTTY 25
+#define _PDCLIB_ENXIO 6
+#define _PDCLIB_EOPNOTSUPP 95
+#define _PDCLIB_EOVERFLOW 75
+#define _PDCLIB_EOWNERDEAD 130
+#define _PDCLIB_EPERM 1
+#define _PDCLIB_EPIPE 32
+#define _PDCLIB_EPROTO 71
+#define _PDCLIB_EPROTONOSUPPORT 93
+#define _PDCLIB_EPROTOTYPE 91
+#define _PDCLIB_ERANGE 34
+#define _PDCLIB_EROFS 30
+#define _PDCLIB_ESPIPE 29
+#define _PDCLIB_ESRCH 3
+#define _PDCLIB_ETIME 62
+#define _PDCLIB_ETIMEDOUT 110
+#define _PDCLIB_ETXTBSY 26
+#define _PDCLIB_EWOULDBLOCK 11
+#define _PDCLIB_EXDEV 18
+
+/* This is used to set the size of the array in struct lconv (<locale.h>) */
+/* holding the error messages for the strerror() and perror() fuctions. If */
+/* you change this value because you are using additional errno values, you */
+/* *HAVE* to provide appropriate error messages for *ALL* locales. */
+/* Needs to be one higher than the highest errno value above. */
+#define _PDCLIB_ERRNO_MAX 132
#endif
projects / pdclib / blobdiff